The SAT-S701 bolts a seat, foot-lever steering and a trailing balance wheel onto any SAT walk-behind reaper in about 30 minutes. Same cutter bar, same acres — without walking a single step.
A reaper seating attachment is a bolt-on kit that turns a walk-behind power reaper into a riding one, so the operator steers from a seat instead of walking behind the machine all day. The SAT-S701 is Sunidhi Agrotech’s kit: a 70 kg mild-steel frame with a seat, foot-lever steering, a clutch-lever and links drive control, and a trailing TVS 3.50-8 support wheel that carries the rider’s weight on uneven ground and along bunds. It fits every SAT walk-behind reaper — the diesel SAT-R101, petrol SAT-R102 and differential SAT-R201 — in about 30 minutes with basic hand tools, with no welding, cutting or permanent change, and unbolts just as quickly for a tight plot. Many makers sell a “reaper with steering and seat” only as a new factory-fitted machine; the SAT-S701 fits the reaper you already own. Factory-direct price starts at ₹25,000.
A walk-behind reaper cuts an acre an hour — but somebody has to walk that acre, hour after hour, in standing crop and harvest heat. That slow drain on the operator is what ends most harvest days early. The SAT-S701 removes it. A sturdy mild-steel frame with a seat, a foot-operated steering lever and a clutch-and-links drive control bolts straight onto your reaper, and a trailing support wheel keeps everything balanced with the rider on board — even on uneven ground and along bunds.
It is built for farmers who harvest long days, for custom-hire operators who count their season in acres, and for any farm where one seated operator should do the work that used to need two people taking turns. We have written up the full field case in our guide, why a reaper with a seat changes harvest days.
One attachment covers the whole SAT reaper family — the self-propelled power reaper in diesel and petrol, and the differential power reaper. Need the walk-behind setup back for a tight plot? Unbolt it just as fast. Supplied and serviced through our dealer network across 9+ states.
Fits with basic hand tools — no welding, no cutting, no permanent change to your reaper. Field-ready the same morning.
Steer with a foot-operated lever while your hands stay on the machine controls — precise rows with far less effort.
Drive engagement runs through a clutch lever and link mechanism, so starts, stops and headland turns stay smooth from the seat.
A TVS 3.50-8 support wheel carries the rider's weight and keeps the reaper stable on uneven fields and bund edges.
A 70 kg fabricated frame in glossy red, welded and finished in our own Ahmedabad plant — made for full Indian seasons.
Ride for the long open fields, unbolt for the tight corner plot — switch between riding and walk-behind whenever the field demands.
Every number below is the factory figure — the same sheet our dispatch team signs off before a unit leaves the plant.
| Specification | SAT-S701 Seating Attachment |
|---|---|
| Model | SAT-S701 |
| Type | Bolt-on riding seat attachment for walk-behind reapers |
| Compatibility | All SAT reapers — SAT-R101 (diesel), SAT-R102 (petrol), SAT-R201 (differential) |
| Fitting time | ~30 minutes with basic hand tools |
| Mounting | Bolt-on — no welding, cutting or permanent modification |
| Steering | Foot-operated lever |
| Drive control | Clutch lever with links mechanism |
| Stability | Trailing support wheel, balanced with operator seated |
| Tyre | TVS 3.50-8 46J |
| Construction | Mild steel frame |
| Weight | Approx. 70 kg |
| Dimensions (L × W × H) | 1.9 × 1.1 × 1.3 m |
| Working speed | ~5 kmph average |
| Fuel use (reaper + attachment) | 1–1.5 litre per hour |
| Finish | Glossy red |
| Price | From ₹25,000 (₹25,000 – ₹30,000) factory-direct — best value ordered with a reaper Delivery: transport is charged separately at actual cost, by distance. Warranty: 1 year from the date of delivery. Returns: machines are built and dispatched to order, so returns are not accepted; manufacturing defects are handled under the 1 year warranty. Full policy. |
What the seat actually changes on a full harvest day.
Play video
The seat changes how you harvest, not what you harvest — the SAT-S701 covers the same crops as the reaper it rides on.
You buy from the plant that builds the attachment — no distributor margin, no dealer mark-up hidden in the quote.
Seat, lever, links and wheel parts come from the same line that made your attachment — a true fit, every time.
Every unit is fitted, run and inspected before it ships — nothing leaves the plant on a promise alone.
On delivery we fit the attachment with you and train your operator — seated harvesting from day one.
The reaper this seat was made for — 5 HP diesel or petrol, cutting an acre an hour as low as 4 cm.
Differential drive with lock for tight, irregular fields — and yes, the SAT-S701 fits this one too.
After the reaping is done — collect, chop and load a full trolley of bhusa in 20–25 minutes.
Not sure which reaper suits your fields? Our comparison, differential vs standard reaper, settles it in five minutes — or browse all seven SAT machines.
Local crop figures, subsidy portals and delivery details for the states where the reaper machine is most in demand.
Fill this in and your enquiry opens directly in WhatsApp — our sales team replies with a factory-direct quote and fitting details for your reaper.
Tell us your crop and acreage — get an honest recommendation, a factory-direct quote and subsidy guidance in one call.
