4 blades (8 cutting edges), a 3 HP motor and an adjustable cut length — enough capacity for 600-800 kg an hour, the kutti machine that keeps a dairy shed running without turning feeding into a full-time job.
Cattle eat every day, twice a day, whether or not anyone has time to chop fodder by hand. The SAT-C301 turns that chore into a short, predictable task.
The SAT-C301 is a chaff cutter — a kutti machine — that draws whole fodder in through feed rollers and cuts it against a shear plate with 4 blades, both edges sharpened for 8 cutting edges per set. Capacity runs to 600-800 kg an hour, and the cut length is adjustable, so the same machine produces fine kutti for young stock and a coarser cut for animals that need more roughage. It handles green fodder and dry straw equally well, which matters because most sheds feed a mix depending on the season. Driven by a 3 HP electric motor, 100% made in India.
Dairy farms of any size, mixed farms that keep a few animals alongside crops, and gaushalas feeding a large herd on a schedule. It is also the natural partner to our SAT-L401 straw loader: the loader brings dry bhusa in from the field, the chaff cutter processes green fodder at the shed, and between them your fodder line is complete from harvest to manger.
Buying your first chaff cutter? Our kutti machine buying guide covers sizing by herd, why blade quality decides the machine’s life, and the safety points worth insisting on. Fodder equipment is also subsidy-eligible in several states — see the Gujarat subsidy roadmap.
Enough capacity that a full day’s feed for a sizeable herd is cut in a single short session.
Both edges of all 4 blades are sharpened, holding an edge through season after season of green and dry fodder. Replaceable wear parts.
Fine kutti for calves, coarser cut for mature stock — one machine covers a mixed herd.
Napier, lucerne, berseem, maize and jowar, plus wheat and paddy straw. No swapping machines by season.
Set up for electric drive where shed power is reliable — quiet, simple and cheap to run.
A machine that runs twice a day, every day, is built differently. Fabricated, welded and load-tested in our own plant.
Factory figures, verified on our own bench before any unit is cleared to leave the plant.
| Specification | Chaff Cutter SAT-C301 |
|---|---|
| Model | SAT-C301 |
| Machine type | Chaff cutter (kutti machine) — fodder processing |
| Cutting capacity | 600-800 kg per hour |
| Number of blades | 4 blades, both edges sharpened (8 cutting edges) |
| Cut length | Adjustable |
| Fodder handled | Green fodder and dry straw |
| Green fodder crops | Napier, lucerne, berseem, maize, jowar, sugarcane tops |
| Dry fodder | Wheat straw, paddy straw, bajra and jowar stalks |
| Motor | 3 HP electric motor, 100% made in India |
| Feed system | Roller feed against a shear plate |
| Construction | Fabricated mild steel with iron components |
| Blade material | Hardened steel, replaceable |
| Pre-dispatch check | Run and inspected under load at the factory |
| Operator training | Free on delivery |
| Price | From ₹28,000 (₹28,000 – ₹30,000) factory-direct — exact quote on request Delivery: transport is charged separately at actual cost, by distance. Warranty: 1 year from the date of delivery. Returns: machines are built and dispatched to order, so returns are not accepted; manufacturing defects are handled under the 1 year warranty. Full policy. |
Throughput and cut length, on real fodder.
Play video
Napier
Lucerne
Berseem
Maize
Jowar
Sugarcane tops
Wheat straw
Mixed fodder
Field tip from our service team: keep the blades sharp and the shear plate gap correct. A blunt blade tears fodder instead of slicing it, which loads the drive, slows the machine and produces a ragged kutti that cattle pick through rather than finish.
No distributor, no middleman margin. The quote you get on WhatsApp is the plant’s own price for the SAT-C301.
Blades, shear plates, bearings and feed rollers come from the same line that built your machine — through your dealer or direct from the factory.
Every SAT-C301 is run under load and inspected before it leaves the plant. Units that fail go back to the line, never to a farm.
Hands-on training on delivery day, so the machine earns from its first field — not its third week.
The field half of your fodder line — a full trolley of fine bhusa in 20–25 minutes.
Cut fodder crops in the field first — a 5 HP walk-behind reaper that clears roughly an acre an hour.
For small, irregular fodder plots where a standard reaper struggles to turn.
Local crop figures, subsidy portals and delivery details for the states where the chaff cutter machine is most in demand.
Fill this in and it opens as a ready WhatsApp message to our sales desk — we reply with the factory-direct price and subsidy guidance for your state.
Tell us your crop and acreage — get an honest recommendation, a factory-direct quote and subsidy guidance in one call.
